| AVAILABLE WEIGHTS | CUTTING DIAMETER |
| 85 grain | 1-1/8" |
| 100 grain, 125 grain | 1-3/16" |
The Thunderhead is widely recognized as the finest fixed blade broadhead ever created. The sharpest blades. The best quality. More animals have been taken over the years with Thunderheads than any other broadhead.
| 60-208 | Thunderhead 85 3-Bld. 6-Pack |
| 60-209 |
Thunderhead 85 Replacement Blades (18) |
| 60-150 | Thunderhead 100 3-Bld. 6-Pack |
| 60-151 | Thunderhead 100 Replacement Blades (18) |
| 60-114 | Thunderhead 125 3-Bld. 6-Pack |
| 60-115 | Thunderhead 125 Replacement Blades (18) |
| 60-114 | Thunderhead 85/100 Lock Rings (6) |
| 60-283 | Thunderhead 125 Lock Rings (6) |
| 60-119 | Thunderhead "O" Rings (6) |
-
Micro Grooved Slimline® Ferrule
Patented micro grooved ferrule greatly increases flight accuracy and penetration power. No other broadhead in the world flies as true as the Thundherhead, period. -
Diamize™ Sharpened Blades
The Diamize™ sharpening process creates the sharpest blades in the industry for massive hemorrhaging and knock down power. These are the sharpest broadhead blades ever created. Sharper blades equal quicker kills.
This antelope was killed using the Thunderhead. To see more trophies from using the Thunderhead click the more photos button below.
-
Should I align my broadheads up with my vanes?
A lot of people still do this, but it is an unnecessary step with today’s modern equipment. A Thunderhead will fly just as well by just screwing them onto the insert tightly, no matter where the blades wind up compared to the vanes. -
Do the Microgrooves really work?
Yes! NAP’s patented microgroove ferrules channel the air over the ferrule for better flight. More importantly, they slide thru and penetrate bone much better that standard ferrules. This really does help get better penetration. -
Thunderheads and spin testing
It’s important to get any broadhead you have to spin true. The easiest way to do this with the Thunderhead is to screw the fully assembled head onto the arrow shaft, and tighten using the supplied wrench. Now untighten the head just a little and wait a few seconds. This will let the o-ring on the back of the ferrule regain its shape and help the head spin true. Now slowly retighten the head and you should be good to go! -
Do I need to use the U.B.A.R. ring?
The UBAR ring is only needed when using the Thunderhead with small diameter carbon arrow shafts. The o-ring on the Thunderhead nests inside the UBAR providing support and helps the broadhead spin true. If you are using large carbons or any aluminum shafts, the UBAR ring is not needed. -
Resharpened blades VS new ones.
It’s always best to use new blades when possible. No resharpen techniques will get Thunderhead blades as sharp as new ones. The Thunderhead blade is ground, honed, stropped and polished with three different grind angles which produce the sharpest blades in the industry.
"I have used Thunderheads ever since I have bowhunted. I am your biggest fan. I have shot the heads where they have hit concrete blocks and survived the impact. Put new blades in, and keep going. I have always told everybody that there was not but one head to shoot, and that was a Thunderhead."
"I have shot thunderhead 100's for years and love them. I have been amazed at their durability.
Thanks for a great product !!!!"
Thanks for a great product !!!!"
